Avantone Pro Mixcube statief kabel price is about 322 £ . This product can be found in Muziekinstrumentaccessoires
Interesse in de Avantone Pro Mixcube? Bax Music maakt er een completere set van met deze handige bundel. Ideaal als je je wilt begeven op het terrein van mixage en mastering van je eigen producties.
Condition: new
Disponibility: in_stock
Delivery Time: 1
Avantone Pro Active MixCube actieve price is about 296 £ . This product can be found in Computer Speakers
De Avantone Pro Active MixCube is een afgeschermde full-range studio mini-referentie monitor. Het ontwerp is een nalatenschap van de legendarische 5C Sound Cubes. Het betreft hier de zwarte uitvoering.
Condition: new
Disponibility: in_stock
Delivery Time: 1
EAN: 0794504980615
Avantone Pro Active MixCube actieve price is about 299 £ . This product can be found in Muziekinstrumentaccessoires
De Avantone Pro Active MixCube is een afgeschermde full-range studio mini-referentie monitor. Het ontwerp is een nalatenschap van de legendarische 5C Sound Cubes. Het betreft hier de Buttercream-uitvoering.
Condition: new
Disponibility: in_stock
Delivery Time: 1
EAN: 0852437001194
Avantone Pro Planar the II price is about 443 £ . This product can be found in Hoofdtelefoons en oordopjes
Zorg ervoor dat je alle kritieke details in je muziek kan horen met de vernieuwde Avantone Planar the II-koptelefoon, voor serieuze studioprofessionals en voor HiFi-enthousiasten.
Condition: new
Disponibility: in_stock
Delivery Time: 1
EAN: 0696550489077
Avantone Pro Mondo kickdrum microfoon price is about 149 £ . This product can be found in Microfoons
Met deze Mondo kick-microfoon van Avantone bent u verzekerd van hoogstaande bassdrum-klanken. Hij heeft een speciale klankkarakteristiek voor een kickdrum waardoor er amper EQ nodig is voor een strakke klank! Met shockmount.
Condition: new
Disponibility: in_stock
Delivery Time: 1
EAN: 0852437001156
Avantone Pro Planar the II price is about 505 £ . This product can be found in Hoofdtelefoons en oordopjes
Zorg ervoor dat je alle kritieke details in je muziek kan horen met de vernieuwde Avantone Planar the II-koptelefoon, voor serieuze studioprofessionals en voor HiFi-enthousiasten.
Condition: new
Disponibility: in_stock
Delivery Time: 1
EAN: 0753459978498
Avantone Pro Active MixCubes actieve price is about 527 £ . This product can be found in Computer Speakers
De Avantone Pro Active MixCubes zijn afgeschermde, full-range studio mini-referentie monitoren, in een set. Het ontwerp is een nalatenschap van de legendarische 5C Sound Cubes.
Condition: new
Disponibility: in_stock
Delivery Time: 1
EAN: 0794504765908
Avantone Pro CV 12 condensator price is about 465 £ . This product can be found in Microfoons
De CV-12 van Avantone Pro is een condensator microfoon die gebruik maakt van een handgeselecteerde 6072A buis, en is geschikt voor o.a. studiovocals, akoestische gitaren, drum overheads, etc.
Condition: new
Disponibility: in_stock
Delivery Time: 1
EAN: 0852437001057
Avantone Pro CLA 200 studio price is about 999 £ . This product can be found in Versterkers en ontvangers
Passieve luidsprekers zijn weer helemaal terug van weggeweest, ook in de studio-omgeving! Dat betekent dat je een goede versterker nodig hebt, en die vind je in de vorm van de Avantone Pro CLA-200, een klasse AB-versterker.
Condition: new
Disponibility: in_stock
Delivery Time: 1
EAN: 0713541493476
Avantone Pro MixCube AREDMONO Active price is about 299 £ . This product can be found in Amusement
Avantone Pro MixCube AREDMONO Active Studio Monitor, red Avantone MixCubes, while originally inspired by the 5C sound cubes of decades ago, have become the industry standard in studios worldwide and the #1 best-selling loudspeaker of its kind. Technical Objective The Avantone Active Mixcubes are designed as high-resolution, fully functional mini reference monitors for stationary or mobile use. The secondary technical objective was to create a timeless design that incorporates a single full-range transducer. Cabinet Design The original 5C Sound Cubes™ were made of ½" particle board covered with a glued-on wood grain chlorine bromide silver paper. The manufacturer opted for a thicker, denser MDF board because of its greater strength and lower-resonance performance. Driver Design The originals were a simple 5" frame design. Today, a die-cast aluminum 5.25" driver/cone assembly was designed to exceed the performance of the originals. The driver, s top plate and T-yoke are made of Sumitomo 1008 low carbon steel. Amplifier Design The amplifier module was designed from the ground up as a true professional amplifier. Features High-resolution, full-featured mini reference monitors for stationary or mobile use Timeless design incorporates a single fullranged transducer Higher strength enclosure than the original 5.25-inch die-cast aluminum driver/cone assembly outperforms originals Technical Data Usage: Active recording/mixdown monitors System type: Active, shielded full-range stereo pair Frequency response: 90Hz - 17,000Hz Impedance: 8 ohms Max SPL: 104db @ 1 meter = 1%THD (PINK-NOISE) Amplifier type: Class A/B Amplifier power: 60 watts RMS@ .005% THD (1KHz) Signal to Noise Ratio: -113 dB Sensitivity: 0dBu (.775VRMS) Driver: 5.25" cast aluminum frame / paper cone / shielded Enclosure: sealed / 18mm MDF Inputs: XLR & TRS +4/balanced and -10 unbalanced dimensions (WxDxH): 165.1x165.1x165.1mm Weight: 3.23kg
Condition: new
Disponibility: available_on_order
Delivery Time: 4-6
Avantone Pro MixCube A Active price is about 598 £ . This product can be found in Amusement
Avantone Pro MixCube A Active StudioMonitor, Set of 2, cream Avantone MixCubes, while originally inspired by the 5C sound cubes of decades ago, have become the industry standard in studios worldwide and the #1 best-selling loudspeaker of its kind. Technical Objective The Avantone Active Mixcubes are designed as high-resolution, fully functional mini reference monitors for stationary or mobile use. The secondary technical objective was to create a timeless design that incorporates a single full-range transducer. Enclosure Design The original 5C Sound Cubes™ were made of ½" particle board covered with a glued-on wood grain chlorine bromide silver paper. The manufacturer opted for a thicker, denser MDF board because of its greater strength and lower-resonance performance. Driver design The originals were a simple 5" frame design. Today, a die-cast aluminum 5.25" driver/cone assembly was designed to exceed the performance of the originals. The driver, s top plate and T-yoke are made of Sumitomo 1008 low carbon steel. Amplifier Design The amplifier module was designed from the ground up as a true professional amplifier. Features High-resolution, full-featured mini reference monitors for stationary or mobile use Timeless design incorporates a single fullranged transducer Higher strength enclosure than the original 5.25-inch die-cast aluminum driver/cone assembly outperforms originals Technical Data Usage: Active recording/mixdown monitors System type: Active, shielded full-range stereo pair Frequency Response: 90Hz - 17,000Hz Impedance: 8 ohms Max SPL: 104db @ 1 meter = 1%THD (PINK-NOISE) Amplifier type: Class A/B Amplifier power: 60 watts RMS@ .005% THD (1KHz) Signal to Noise Ratio: -113 dB Sensitivity: 0dBu (.775VRMS) Driver: 5.25" cast aluminum frame / paper cone / shielded Enclosure: sealed / 18mm MDF Inputs: XLR & TRS +4/balanced and -10 unbalanced dimensions (WxDxH): 165.1x165.1x165.1mm (per piece) Weight: 3,23kg (per piece)
Condition: new
Disponibility: in_stock
Delivery Time: 1-3
Avantone Pro MixCube PM Passive price is about 250.9 £ . This product can be found in Amusement
Avantone Pro MixCube PM Passive Studio Monitor, cream Avantone MixCubes, while originally inspired by the 5C sound cubes of decades ago, have become the industry standard in studios worldwide and the #1 best-selling loudspeaker of its kind. Technical Objective Avantone Mixcubes are designed as high-resolution, fully functional mini reference monitors for stationary or mobile use. The secondary technical objective was to create a timeless design that incorporates a single fullrange transducer. Enclosure Design The original 5C Sound Cubes™ were made of ½" particle board covered with a glued-on wood grain chlorine bromide silver paper. The manufacturer opted for a thicker, denser MDF board because of its greater strength and lower-resonance performance. Driver design The originals were a simple 5" frame design. Today, a die-cast aluminum 5.25" driver/cone assembly was designed to exceed the performance of the originals. The driver, s top plate and T-yoke are made of Sumitomo 1008 low carbon steel. Recommended power rating is 50-200 watts solid state or 10-100 watts tube amplifier. Features High-resolution, full-featured mini reference monitor for stationary or mobile use Timeless design incorporates a single fullranged transducer Enclosure with higher strength than the original 5.25-inch die-cast aluminum driver/cone assembly outperforms originals Technical Data System type: Shielded full-range monitor Frequency response: 90Hz - 17,000Hz Impedance: 8 ohms - SPL / Sensitivity: 93dB @ 1w / 1 meter Recommended power: From 10-200 watts Driver: 5.25" with cast aluminum frame Enclosure: sealed / 18mm MDF / Dacron acoustic filling Input: 3-way terminals with plastic coating and metal terminals with CE marking (for up to 12-gauge wire, cable lugs, double banana plugs) Dimensions (WxDxH): 165.1x165.1x165.1mm Weight: 3.23kg
Condition: new
Disponibility: available_on_order
Shipping: 7.9
Delivery Time: 4-6
Avantone Pro MixCube AB Active price is about 598 £ . This product can be found in Amusement
Avantone Pro MixCube AB Active StudioMonitor, Set of 2, black Avantone MixCubes, while originally inspired by the 5C sound cubes of decades ago, have become the industry standard in studios worldwide and the #1 best-selling loudspeaker of its kind. Technical Objective The Avantone Active Mixcubes are designed as high-resolution, fully functional mini reference monitors for stationary or mobile use. The secondary technical objective was to create a timeless design that incorporates a single full-range transducer. Enclosure Design The original 5C Sound Cubes™ were made of ½" particle board covered with a glued-on wood grain chlorine bromide silver paper. The manufacturer opted for a thicker, denser MDF board because of its greater strength and lower-resonance performance. Driver Design The originals were a simple 5" frame design. Today, a die-cast aluminum 5.25" driver/cone assembly was designed to exceed the performance of the originals. The driver, s top plate and T-yoke are made of Sumitomo 1008 low carbon steel. Amplifier Design The amplifier module was designed from the ground up as a true professional amplifier. Features High-resolution, full-featured mini reference monitors for stationary or mobile use Timeless design incorporates a single fullranged transducer Higher strength enclosure than the original 5.25-inch die-cast aluminum driver/cone assembly outperforms originals Technical Data Usage: Active recording/mixdown monitors System type: Active, shielded full-range stereo pair Frequency Response: 90Hz - 17,000Hz Impedance: 8 ohms Max SPL: 104db @ 1 meter = 1%THD (PINK-NOISE) Amplifier type: Class A/B Amplifier power: 60 watts RMS@ .005% THD (1KHz) Signal to Noise Ratio: -113 dB Sensitivity: 0dBu (.775VRMS) Driver: 5.25" cast aluminum frame / paper cone / shielded Enclosure: sealed / 18mm MDF Inputs: XLR & TRS +4/balanced and -10 unbalanced Dimensions (WxDxH): 165.1x165.1x165.1mm (per unit) Weight: 3.23kg (per piece)
Condition: new
Disponibility: in_stock
Delivery Time: 1-3
Avantone Pro MixCube AMB Active price is about 299 £ . This product can be found in Amusement
Avantone Pro MixCube AMB Active Studio Monitor, black Avantone MixCubes, while originally inspired by the 5C sound cubes of decades ago, have become the industry standard in studios worldwide and the #1 best-selling loudspeaker of its kind. Technical Objective The Avantone Active Mixcubes are designed as high-resolution, fully functional mini reference monitors for stationary or mobile use. The secondary technical objective was to create a timeless design that incorporates a single full-range transducer. Cabinet Design The original 5C Sound Cubes™ were made of ½" particle board covered with a glued-on wood grain chlorine bromide silver paper. The manufacturer opted for a thicker, denser MDF board because of its greater strength and lower-resonance performance. Driver Design The originals were a simple 5" frame design. Today, a die-cast aluminum 5.25" driver/cone assembly was designed to exceed the performance of the originals. The driver, s top plate and T-yoke are made of Sumitomo 1008 low carbon steel. Amplifier Design The amplifier module was designed from the ground up as a true professional amplifier. Features High-resolution, full-featured mini reference monitors for stationary or mobile use Timeless design incorporates a single fullranged transducer Higher strength enclosure than the original 5.25-inch die-cast aluminum driver/cone assembly outperforms originals Technical Data Usage: Active recording/mixdown monitors System type: Active, shielded full-range stereo pair Frequency response: 90Hz - 17,000Hz Impedance: 8 ohms Max SPL: 104db @ 1 meter = 1%THD (PINK-NOISE) Amplifier type: Class A/B Amplifier power: 60 watts RMS@ .005% THD (1KHz) Signal to Noise Ratio: -113 dB Sensitivity: 0dBu (.775VRMS) Driver: 5.25" cast aluminum frame / paper cone / shielded Enclosure: sealed / 18mm MDF Inputs: XLR & TRS +4/balanced and -10 unbalanced dimensions (WxDxH): 165.1x165.1x165.1mm Weight: 3.23kg
Condition: new
Disponibility: in_stock
Delivery Time: 1-3
Avantone Pro MixCube ARED ActiveStudioMonitor price is about 598 £ . This product can be found in Amusement
Avantone Pro MixCube ARED ActiveStudioMonitor, Set of 2, red Avantone MixCubes, while originally inspired by the 5C sound cubes of decades ago, have become the industry standard in studios worldwide and the #1 best-selling loudspeaker of its kind. Technical Objective The Avantone Active Mixcubes are designed as high-resolution, fully functional mini reference monitors for stationary or mobile use. The secondary technical objective was to create a timeless design that incorporates a single full-range transducer. Enclosure Design The original 5C Sound Cubes™ were made of ½" particle board covered with a glued-on wood grain chlorine bromide silver paper. The manufacturer opted for a thicker, denser MDF board because of its greater strength and lower-resonance performance. Driver Design The originals were a simple 5" frame design. Today, a die-cast aluminum 5.25" driver/cone assembly was designed to exceed the performance of the originals. The driver, s top plate and T-yoke are made of Sumitomo 1008 low carbon steel. Amplifier Design The amplifier module was designed from the ground up as a true professional amplifier. Features High-resolution, full-featured mini reference monitors for stationary or mobile use Timeless design incorporates a single fullranged transducer Higher strength enclosure than the original 5.25-inch die-cast aluminum driver/cone assembly outperforms originals Technical Data Usage: Active recording/mixdown monitors System type: Active, shielded full-range stereo pair Frequency Response: 90Hz - 17,000Hz Impedance: 8 ohms Max SPL: 104db @ 1 meter = 1%THD (PINK-NOISE) Amplifier type: Class A/B Amplifier power: 60 watts RMS@ .005% THD (1KHz) Signal to Noise Ratio: -113 dB Sensitivity: 0dBu (.775VRMS) Driver: 5.25" cast aluminum frame / paper cone / shielded Enclosure: sealed / 18mm MDF Inputs: XLR & TRS +4/balanced and -10 unbalanced Dimensions (WxDxH): 165.1x165.1x165.1mm (per piece) Weight: 3.23kg (per piece)
Condition: new
Disponibility: available_on_order
Delivery Time: 4-6
Avantone Pro MixCube P Passive price is about 387.44 £ . This product can be found in Amusement
Avantone Pro MixCube P Passive StudioMonitor, Set of 2, cream Avantone MixCubes, while originally inspired by the 5C sound cubes of decades ago, have become the industry standard in studios worldwide and the #1 best-selling loudspeaker of its kind. Technical Objective Avantone Mixcubes are designed as high-resolution, fully functional mini reference monitors for stationary or mobile use. The secondary technical objective was to create a timeless design that incorporates a single fullrange transducer. Enclosure Design The original 5C Sound Cubes™ were made of ½" particle board covered with a glued-on wood grain chlorine bromide silver paper. The manufacturer opted for a thicker, denser MDF board because of its greater strength and lower-resonance performance. Driver Design The originals were a simple 5" frame design. Today, a die-cast aluminum 5.25" driver/cone assembly was designed to exceed the performance of the originals. The driver, s top plate and T-yoke are made of Sumitomo 1008 low carbon steel. Recommended power rating is 50-200 watts solid state or 10-100 watts tube amplifier. Features High-resolution, full-featured mini reference monitor for stationary or mobile use Timeless design incorporates a single fullranged transducer Enclosure with higher strength than the original 5.25-inch die-cast aluminum driver/cone assembly outperforms originals Technical Data System type: Shielded full-range monitor Frequency response: 90Hz - 17,000Hz Impedance: 8 ohms - SPL / Sensitivity: 93dB @ 1w / 1 meter Recommended power: From 10-200 watts Driver: 5.25" with cast aluminum frame Enclosure: sealed / 18mm MDF / Dacron acoustic filling Input: 3-way terminals with plastic coating and metal terminals with CE marking (for up to 12-gauge wire, cable lugs, double banana plugs) Dimensions (WxDxH): 165.1x165.1x165.1mm (per piece) Weight: 3.23kg (per piece)
Condition: new
Disponibility: available_on_order
Delivery Time: 4-6
Avantone Pro MixCube PB Passive price is about 387.44 £ . This product can be found in Amusement
Avantone Pro MixCube PB Passive StudioMonitor,Set of 2, black Avantone MixCubes, while originally inspired by the 5C sound cubes of decades ago, have become the industry standard in studios worldwide and the #1 best-selling loudspeaker of its kind. Technical Objective Avantone Mixcubes are designed as high-resolution, fully functional mini reference monitors for stationary or mobile use. The secondary technical objective was to create a timeless design that incorporates a single fullrange transducer. Enclosure Design The original 5C Sound Cubes™ were made of ½" particle board covered with a glued-on wood grain chlorine bromide silver paper. The manufacturer opted for a thicker, denser MDF board because of its greater strength and lower-resonance performance. Driver Design The originals were a simple 5" frame design. Today, a die-cast aluminum 5.25" driver/cone assembly was designed to exceed the performance of the originals. The driver, s top plate and T-yoke are made of Sumitomo 1008 low carbon steel. Recommended power rating is 50-200 watts solid state or 10-100 watts tube amplifier. Features High-resolution, full-featured mini reference monitor for stationary or mobile use Timeless design incorporates a single fullranged transducer Enclosure with higher strength than the original 5.25-inch die-cast aluminum driver/cone assembly exceeds the performance of the originals Technical Data System type: Shielded full-range monitor Frequency response: 90Hz - 17,000Hz Impedance: 8 ohms - SPL / Sensitivity: 93dB @ 1w / 1 meter Recommended power: From 10-200 watts Driver: 5.25" with cast aluminum frame Enclosure: sealed / 18mm MDF / Dacron acoustic filling Input: 3-way terminals with plastic coating and metal terminals with CE marking (for up to 12-gauge wire, cable lugs, double banana plugs) Dimensions (WxDxH): 165.1x165.1x165.1mm (per piece) Weight: 3.23kg (per piece)
Condition: new
Disponibility: available_on_order
Delivery Time: 4-6
Avantone Pro MixCube PMB Passive price is about 250.9 £ . This product can be found in Amusement
Avantone Pro MixCube PMB Passive Studio Monitor, black Avantone MixCubes, while originally inspired by the 5C sound cubes of decades ago, have become the industry standard in studios worldwide and the #1 best-selling loudspeaker of its kind. Technical Objective Avantone Mixcubes are designed as high-resolution, fully functional mini reference monitors for stationary or mobile use. The secondary technical objective was to create a timeless design that incorporates a single fullrange transducer. Enclosure Design The original 5C Sound Cubes™ were made of ½" particle board covered with a glued-on wood grain chlorine bromide silver paper. The manufacturer opted for a thicker, denser MDF board because of its greater strength and lower-resonance performance. Driver design The originals were a simple 5" frame design. Today, a die-cast aluminum 5.25" driver/cone assembly was designed to exceed the performance of the originals. The driver, s top plate and T-yoke are made of Sumitomo 1008 low carbon steel. Recommended power rating is 50-200 watts solid state or 10-100 watts tube amplifier. Features High-resolution, full-featured mini reference monitor for stationary or mobile use Timeless design incorporates a single fullranged transducer Enclosure with higher strength than the original 5.25-inch die-cast aluminum driver/cone assembly outperforms originals Technical Data System type: Shielded full-range monitor Frequency response: 90Hz - 17,000Hz Impedance: 8 ohms - SPL / Sensitivity: 93dB @ 1w / 1 meter Recommended power: From 10-200 watts Driver: 5.25" with cast aluminum frame Enclosure: sealed / 18mm MDF / Dacron acoustic filling Input: 3-way terminals with plastic coating and metal terminals with CE marking (for up to 12-gauge wire, cable lugs, double banana plugs) Dimensions (WxDxH): 165.1x165.1x165.1mm Weight: 3.23kg
Condition: new
Disponibility: available_on_order
Shipping: 7.9
Delivery Time: 4-6
Avantone Pro MixCube AM Active price is about 299 £ . This product can be found in Amusement
Avantone Pro MixCube AM Active Studio Monitor, cream Avantone MixCubes, while originally inspired by the 5C sound cubes of decades ago, have become the industry standard in studios worldwide and the #1 best-selling loudspeaker of its kind. Technical Objective The Avantone Active Mixcubes are designed as high-resolution, fully functional mini reference monitors for stationary or mobile use. The secondary technical objective was to create a timeless design that incorporates a single full-range transducer. Cabinet Design The original 5C Sound Cubes™ were made of ½" particle board covered with a glued-on wood grain chlorine bromide silver paper. The manufacturer opted for a thicker, denser MDF board because of its greater strength and lower-resonance performance. Driver Design The originals were a simple 5" frame design. Today, a die-cast aluminum 5.25" driver/cone assembly was designed to exceed the performance of the originals. The driver, s top plate and T-yoke are made of Sumitomo 1008 low carbon steel. Amplifier Design The amplifier module was designed from the ground up as a true professional amplifier. Features High-resolution, full-featured mini reference monitors for stationary or mobile use Timeless design incorporates a single fullranged transducer Higher strength enclosure than the original 5.25-inch die-cast aluminum driver/cone assembly outperforms originals Technical Data Usage: Active recording/mixdown monitors System type: Active, shielded full-range stereo pair Frequency response: 90Hz - 17,000Hz Impedance: 8 ohms Max SPL: 104db @ 1 meter = 1%THD (PINK-NOISE) Amplifier type: Class A/B Amplifier power: 60 watts RMS@ .005% THD (1KHz) Signal to Noise Ratio: -113 dB Sensitivity: 0dBu (.775VRMS) Driver: 5.25" cast aluminum frame / paper cone / shielded Enclosure: sealed / 18mm MDF Inputs: XLR & TRS +4/balanced and -10 unbalanced dimensions (WxDxH): 165.1x165.1x165.1mm Weight: 3.23kg
Condition: new
Disponibility: in_stock
Delivery Time: 1-3
Innox IVA 35 Pro statief price is about 76.95 £ . This product can be found in Muziekinstrumentaccessoires
Deze fraaie PA-luidsprekerstatieven van Innox IVA 35 Pro behoren bij even zo fraaie luidsprekers. De statieven zijn robuust uitgevoerd en staan bijzondere stabiel onder de zwaarder uitgevoerde luidsprekers. Geleverd met tas.
Condition: new
Disponibility: in_stock
Shipping: 4.95
Delivery Time: 1
EAN: 8718546749100